<CNC Diagnostic>

Welcome, Guest. Please Login or Register.

	09/07/10 at 7:00am News:

CNC Diagnostic Control Board › General Category › Test Zone
(Moderator: George)

‹ No topic | No topic ›

Pages: 1

Amada punching w/Fanuc 6mb controller (Read 2857 times)

pbintl YaBB Newbies I Love CNC! Posts: 0 Gender:	Amada punching w/Fanuc 6mb controller 10/13/07 at 9:17am My punching machine stoped prior to work. The work clamp was suddenly opened and the stop button light was lit. Work clamp is no more working with foot switch and Estop is un reset able. I have 24V DC from Foot switch for input but no out put voltage to the clamp relay. Any kind of suggestion will be appreciates. PJ.
Back to top	IP Logged

pbintl

YaBB Newbies

I Love CNC!

Posts: 0
Gender: male

Re: Amada punching w/Fanuc 6mb controller
Reply #1 - 11/05/07 at 7:40am

Quote from pbintl on 10/13/07 at 9:17am:

My punching machine stoped prior to work. The work clamp was suddenly opened and the stop button light was lit.

Work clamp is no more working with foot switch and stop button light is un reset able.
I have 24V DC from Foot switch for input but no out put voltage to the clamp relay.

Any kind of suggestion will be appreciates.

PJ.

IP Logged

Pages: 1

CNC Diagnostic Control Board › General Category › Test Zone
(Moderator: George)

‹ No topic | No topic ›